SpeedLab K&N Mazda 6 Performance Intake SpeedLab K&N Mazda 6 Performance Intake Speedlab SpeedLab Performance Intake Systems are designed to  boosts in horsepower and torque by bringing more air into the intake chamber. Our cold air intake system is designed for maximum power and air flow using a mandrel bent tubing and optimized and correct MAF sensor placement. SpeedLab engineers each part with an emphasis on performance and engine reliability, with each intake system being a true 100% bolt on affair with no cutting, welding or modification of the vehicle. All SpeedLab Intakes use only genuine K&N filters, the best in the world for a lifetime of worry free performance. No Check-Engine Lights: The filter and tubing housing is precision made to prevent air leaks and inaccurate readings, with the correct fitment and specifications. K&N High Flow Air Filter: Reusable and water resistant, K&N has been in the business of performance filters for almost half a century, making them the undisputed world leader. Custom Reinforced Silicone Connector: Constructed from multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow All necessary hardware included for bolt on installation. One year warranty for the intake tube and mounting hardware and lifetime warranty for the K&N filter. Available in red, blue, black and polished finish *Free install in our shop, please select date from checkout page FAQsQ: Will this really make power?A: Yes it will! Otherwise it would be kinda pointless to sell it.   Q: How often do I clean the filter?A: K&N recommends every 10,000 miles or 16,000 kilometers or simply once a year. Q: How do I clean the filter?A: You will need the K&N cleaning kit and ther are a ton of YouTube videos on how to clean the filter by yourself. Q: Doesn't your filter come with a heatshield?A: Truth be told, it's not really needed. It makes the same amount of power with or without a heat shield. Q: Will your intake give a CEL (check engine light)?A: No it won't. Q: What's the tube made of?A: Stainless steel or aluminum. Q: Is there a difference in the material?A: In terms of performance, nope. If you want the nitty gritty of it, aluminum is 30% lighter than stainless steel, but the weight savings of a few grams is pretty much negligible. Q: I have a ___________ filter, can I just buy the tubing?A: No you can't. We're not being greedy here. Primarily we don't know what your filter is or the condition, so we can't guarantee the performance if you don't get the whole kit. Plus some filters actually lose power like Simota. Q: Do you have a short ram version?A: We actually do, its simply the filter and the upper pipe with the mass air flow sensor mount P8,500 Q: I'm concerned about flooding, will the filter suck up water?A: We have developed a bypass valve (P2,500) that will open should the filter head become submerged under water, offering a last line of defense against flood crossings. But go into a flood deep enough and the car will suck in water, intake or no intake. A little common sense is needed and inconveniencing yourself and others is a lot cheaper compared to a blown engine. Q: What's the warranty? A: K&N has a 1,000,000 mile warranty on the filter itself.

SpeedLab K&N Mazda 6 Performance Intake

Code: SpeedLab K&N Mazda 3 2.0L/2.3L/2.5L Performance Intake
Sale
SpeedLab K&N Mazda 6 Performance Intake
SpeedLab K&N Mazda 6 Performance Intake SpeedLab K&N Mazda 6 Performance Intake
SpeedLab K&N Mazda 6 Performance Intake SpeedLab K&N Mazda 6 Performance Intake
₱12,500.00 ₱11,500.00
In Stock

SpeedLab Performance Intake Systems are designed to  boosts in horsepower and torque by bringing more air into the intake chamber. Our cold air intake system is designed for maximum power and air flow using a mandrel bent tubing and optimized and correct MAF sensor placement. SpeedLab engineers each part with an emphasis on performance and engine reliability, with each intake system being a true 100% bolt on affair with no cutting, welding or modification of the vehicle. All SpeedLab Intakes use only genuine K&N filters, the best in the world for a lifetime of worry free performance.

  • No Check-Engine Lights: The filter and tubing housing is precision made to prevent air leaks and inaccurate readings, with the correct fitment and specifications.
  • K&N High Flow Air Filter: Reusable and water resistant, K&N has been in the business of performance filters for almost half a century, making them the undisputed world leader.
  • Custom Reinforced Silicone Connector: Constructed from multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
  • All necessary hardware included for bolt on installation.
  • One year warranty for the intake tube and mounting hardware and lifetime warranty for the K&N filter.
  • Available in red, blue, black and polished finish

*Free install in our shop, please select date from checkout page

FAQs
Q: Will this really make power?
A: Yes it will! Otherwise it would be kinda pointless to sell it.

 

Q: How often do I clean the filter?
A: K&N recommends every 10,000 miles or 16,000 kilometers or simply once a year.

Q: How do I clean the filter?
A: You will need the K&N cleaning kit and ther are a ton of YouTube videos on how to clean the filter by yourself.

Q: Doesn't your filter come with a heatshield?
A: Truth be told, it's not really needed. It makes the same amount of power with or without a heat shield.

Q: Will your intake give a CEL (check engine light)?
A: No it won't.

Q: What's the tube made of?
A: Stainless steel or aluminum.

Q: Is there a difference in the material?
A: In terms of performance, nope. If you want the nitty gritty of it, aluminum is 30% lighter than stainless steel, but the weight savings of a few grams is pretty much negligible.

Q: I have a ___________ filter, can I just buy the tubing?
A: No you can't. We're not being greedy here. Primarily we don't know what your filter is or the condition, so we can't guarantee the performance if you don't get the whole kit. Plus some filters actually lose power like Simota.

Q: Do you have a short ram version?
A: We actually do, its simply the filter and the upper pipe with the mass air flow sensor mount P8,500

Q: I'm concerned about flooding, will the filter suck up water?
A: We have developed a bypass valve (P2,500) that will open should the filter head become submerged under water, offering a last line of defense against flood crossings. But go into a flood deep enough and the car will suck in water, intake or no intake. A little common sense is needed and inconveniencing yourself and others is a lot cheaper compared to a blown engine.

Q: What's the warranty? 
A: K&N has a 1,000,000 mile warranty on the filter itself.

SpeedLab Performance Intake Systems are designed to  boosts in horsepower and torque by bringing more air into the intake chamber. Our cold air intake system is designed for maximum power and air flow using a mandrel bent tubing and optimized and correct MAF sensor placement. SpeedLab engineers each part with an emphasis on performance and engine reliability, with each intake system being a true 100% bolt on affair with no cutting, welding or modification of the vehicle. All SpeedLab Intakes use only genuine K&N filters, the best in the world for a lifetime of worry free performance.

  • No Check-Engine Lights: The filter and tubing housing is precision made to prevent air leaks and inaccurate readings, with the correct fitment and specifications.
  • K&N High Flow Air Filter: Reusable and water resistant, K&N has been in the business of performance filters for almost half a century, making them the undisputed world leader.
  • Custom Reinforced Silicone Connector: Constructed from multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
  • All necessary hardware included for bolt on installation.
  • One year warranty for the intake tube and mounting hardware and lifetime warranty for the K&N filter.
  • Available in red, blue, black and polished finish

*Free install in our shop, please select date from checkout page

FAQs
Q: Will this really make power?
A: Yes it will! Otherwise it would be kinda pointless to sell it.

 

Q: How often do I clean the filter?
A: K&N recommends every 10,000 miles or 16,000 kilometers or simply once a year.

Q: How do I clean the filter?
A: You will need the K&N cleaning kit and ther are a ton of YouTube videos on how to clean the filter by yourself.

Q: Doesn't your filter come with a heatshield?
A: Truth be told, it's not really needed. It makes the same amount of power with or without a heat shield.

Q: Will your intake give a CEL (check engine light)?
A: No it won't.

Q: What's the tube made of?
A: Stainless steel or aluminum.

Q: Is there a difference in the material?
A: In terms of performance, nope. If you want the nitty gritty of it, aluminum is 30% lighter than stainless steel, but the weight savings of a few grams is pretty much negligible.

Q: I have a ___________ filter, can I just buy the tubing?
A: No you can't. We're not being greedy here. Primarily we don't know what your filter is or the condition, so we can't guarantee the performance if you don't get the whole kit. Plus some filters actually lose power like Simota.

Q: Do you have a short ram version?
A: We actually do, its simply the filter and the upper pipe with the mass air flow sensor mount P8,500

Q: I'm concerned about flooding, will the filter suck up water?
A: We have developed a bypass valve (P2,500) that will open should the filter head become submerged under water, offering a last line of defense against flood crossings. But go into a flood deep enough and the car will suck in water, intake or no intake. A little common sense is needed and inconveniencing yourself and others is a lot cheaper compared to a blown engine.

Q: What's the warranty? 
A: K&N has a 1,000,000 mile warranty on the filter itself.